Automatic horizontal tensile tester TP-B11 ✓ Sample (size) length : 90 to 200 mm ✓ Sample width : 15 mm, 25 mm, 50mm ✓ Measuring range : 0 to 30, 0 to 100 N,0 to 300 N Automatic horizontal tensile tester TP-B12 ✓ Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable) ✓ Sample width : 15 mm ✓ Measuring range : 0 to 30, 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N Bekk Smoothness tester TP-L20 ✓ Measuring scope : ( 1 to 9999) s, divided in to (1 to 15) s, (15 to 300) s, (300 to 9999) s, the automatic (no. more than 200 s) ✓ Accuracy : ±0.1 s within 300 s ✓ Vacuum system volume (ml) : Bigger volume: 380 ± 1Smaller volume: 38 ± 1 Carton compression tester TP-I10 ✓ Measuring range : 0.1 to 10 kN ✓ Indication error : < ± 1% ✓ Platen Size : 500×500 mm (customized) Carton compression tester TP-I11 ✓ Measuring range : 1 to 50 kN ✓ Indication error : < ± 1% ✓ Platen Size : 800×800 mm/ 1000×1000 mm/ 1200×1200 mm/ 1500×1500 mm (customized) COBB sample cutter TP-C30 ✓ Sample diameter : 125 mm ✓ Sample error : ± 0.2 mm ✓ Sample Thickness : 0.1 to 1.0 mm Coefficient of friction tester TP-D10 ✓ Measurement range : 0.01 to 10 N ✓ Slider weight : 200 g ✓ Slider size : 63×63 mm Crush tester TP-L10 ✓ Measurement range : 5 to 500 N, 50 to 3000 N ✓ Resolution : 1 N ✓ Accuracy : ± 1 % Electronic bending stiffness tester TP-E10 ✓ Testing speed : 200° ± 20° / min ✓ Test range : 1 to 10000 mN ✓ Indicating Error : ± 1 % Electronic Tearing tester TP-J21 ✓ Capacity : 10 -16000 mN ✓ Resolution : 0.1 mN ✓ Tearing arm : 104 ± 1 mm Folding endurance tester TP-M10 ✓ Measuring scope : 0 to 99999 s ✓ Folding angle : 135° ± 2° ✓ Tensile scope : 4.9 to 14.7 N Ink rubber tester TP-F10 ✓ Sample size (L*B) : 230×50 mm (can join short samples together) ✓ Rub pressure : 20 ± 0.2 N ✓ Friction speed : 43 times / min Internal Ply bond Tester TP-J11 ✓ Capacity : A: 20 to 500 J/m2 B: 500 to 1000 J/m2 ✓ Impact angle : 90° ✓ Unit : Lb-ft/in2  J/m2 Mullen burst tester TP-K10 ✓ Measurement range : 0 to 5600 kPa ✓ Accuracy : ± 0.5 % F.S. ✓ Compression speed : 170 ± 15 ml/min Mullen burst tester TP-K11 ✓ Measurement range : 0 to 1600 kPa ✓ Accuracy : ± 0.5 % F.S. ✓ Compression speed : 95 ± 5 ml/min Paper air permeability tester TP-J10 ✓ Measuring range : 0 to 1000 ml/min ✓ Test area : 10 ± 0.02 cm2 ✓ Area differential pressure : 1 ± 0.01 kPa Paper air permeability tester TP-J10(B) ✓ Sample Size : 50 x 50 mm ✓ Bore Diameter of Fixture : 28.6 ± 0.1 mm (Area: 642 mm2) ✓ Measuring Range : 0 ~ 100 ml (Scale 25 ml), 100 ~ 350 ml (Scale 50 ml) Paper and cardboard thickness meter TP-E20 ✓ Measuring range : 0 to 4 mm ✓ Accuracy : 0.01 or 0.001 mm ✓ Gauge : Analogue gauge display Paper and cardboard thickness meter TP-E21 ✓ Measuring range : 0 to 20 mm ✓ Accuracy : 0.01 mm ✓ Gauge : Analogue gauge display Paper tearing tester TP-J20 ✓ Measuring range : 0 to 1000 mN ✓ Resolution : 0.1 mN ✓ Indication error : ± 1 % Pulp beating (refining) freeness tester TP-C10 ✓ Measurement range : 0 to 100° SR ✓ Sealed testing speed : 100 ± 10 mm/s ✓ Volume of distilled water : 1000 ± 5 ml Puncture strength tester TP-J12 ✓ Measuring range : A (1 to 6) J indicating error ± 0.05 JB (1 to 12) J indicating error ± 0.05 JC (1 to 24) J indicating error ± 0.05 JD (1 to 48) J indicating err ✓ Frictional resistance : ✓ Pyramid dimension : Three sides: 60×60×60 mm, height 25 ± 0.7 mm, Arris edge fillet radius 1.5 ± 0.1 mm Softness tester TP-H10 ✓ Measuring range : 10 to 1000 mN ✓ Division value : 1 mN ✓ Accuracy : ± 1% Standard strip cutter TP-G10 ✓ Sample width : 15 mm ✓ Sample maximum length : 300 mm ✓ Parallelism : ≤ 0.1 mm Tensile Stiffness Tester TP-B10 ✓ Sample (size) length : 38×70 mm ✓ Measuring range : (1-500) mN.m (divided into 7 small ranges) ✓ Indication error : 0.02 Vertical tensile tester TP-B20 ✓ Sample (size) length : 0 to 200 mm adjustable ✓ Sample width : 15 mm ✓ Measuring range : 0 to 30 N (tissue paper), 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N Water absorption tester TP-C20 ✓ Measurement range : 0 to 200 mm ✓ Specimen size : 15×250 mm ✓ Division value : 1 mm Water absorption tester- Cobb Tester TP-C21 ✓ Metal Cylinder inner area : (100 ± 0.2) cm2 ✓ Metal Cylinder height : 50 mm ✓ Metal roller width : (200 ± 0..5) mm Whiteness and chromaticity tester TP-A10 ✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm ✓ Measurement mode : Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ✓ Stability : ≤ 0.1 within 30 min Whiteness meter TP-A11 ✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm ✓ System : D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm ✓ Light source : D65 as illuminating source