Primary adhesive tester LD-TPAT-A10
SKU: LD-TPAT-A10Primary adhesive testerLD-TPAT-A10is based on principles of inclined surface rolling ball tack method to form a bond with surface of another material upon brief contact under virtually no pressure. It is widely used in paper & plastic industry for packaging & other purpose. The adjustable inclined angle of this adhesive tester, can be adjusted freely to meets requirements of the users.
- ✓ Designed is in accordance with rolling ball method
- ✓ Adjustable inclined angle range 0 to 40°
- ✓ Superior steel balls design
- ✓ Easy to operate
Also available in:
The maximum temperature : 300°C
Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
Cutting tool distance : 16 mm
Measuring range : 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)
Measuring range : 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
Vacuum degree : 0 to 90 KPa
| Net weight | 6 kg |
| Panel width | 120 mm |
| Test area width | 80 mm |
| Dimension (L*W*H) | 320×140×180 mm |
| Standard steel balls | 1/32 to 1 inch |
| Inclined adjustable angle | 0 to 40° |
Primary Adhesive Tester has applications in adhesive tests of pressure sensitive tapes, bandages, plaster, label, films & other products.
Similar Products
Aging Oven TAO-A10
✓ The maximum temperature : 300°C
✓ Temperature fluctuation : Within ± 0.5°C
Charpy/ Izod Impact Tester TCI-A10
✓ Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
✓ Impact energy (Izod) : 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
Falling Weight Impact Tester TFWT-A10
✓ Temperature range : 10 to 35°C
✓ Maximum falling height : 2000 mm
Heat sealer THS-A10
✓ Seal temperature : Room temperature -250°C
✓ Control accuracy : ± 0.2°C
Lasting adhesive tester TLAT-A10
✓ Standard roller : 2000 ± 50 g
✓ Testing stations : 3
