Falling Weight Impact Tester LD-TFWT-A10
SKU: LD-TFWT-A10Falling Weight Impact TesterLD-TFWT-A10is mainly used to calculate impact resistance of thermoplastic sheets, pipes and plastic fittings under given specified conditions of impact by means of falling weight. It determines anti-impact properties of plastic pipes, sheets and other products. This impact tester is adopted with PLC control & digital touch screen technology for controlling parts like proper figure setup, zero adjustment, preset dropping height, raising & dropping hammer. Adopted with pneumatic technology to prevent secondary impacts with 100 % capture rate.
- ✓ Adopted with double pipe structure
- ✓ Adopted with PLC controlled system
- ✓ Digital touch screen technology
- ✓ Adopted with pneumatic technology prevents secondary impacts
- ✓ Determines anti-impact properties of materials
Also available in:
The maximum temperature : 300°C
Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
Cutting tool distance : 16 mm
Measuring range : 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)
Measuring range : 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
Vacuum degree : 0 to 90 KPa
| Dimension | 730×700×3600 mm |
| Net weight | 300 kg |
| Hammer mass | 0.25 to 16 kg |
| Height error | < ± 2 mm |
| Power supply | AC 220 V +/- 10 %, 50 Hz single phrase |
| Noses of strikers | d25 to d90 |
| Temperature range | 10 to 35°C |
| Maximum falling height | 2000 mm |
| Resolution of displacement | 1 mm |
Falling Weight Impact Tester is used for impact testing strength of plastic sheets, pipes.
Similar Products
Aging Oven TAO-A10
✓ The maximum temperature : 300°C
✓ Temperature fluctuation : Within ± 0.5°C
Charpy/ Izod Impact Tester TCI-A10
✓ Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
✓ Impact energy (Izod) : 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
Heat sealer THS-A10
✓ Seal temperature : Room temperature -250°C
✓ Control accuracy : ± 0.2°C
Lasting adhesive tester TLAT-A10
✓ Standard roller : 2000 ± 50 g
✓ Testing stations : 3
