Benchtop Dissolved oxygen meterLD-LBDO-A11is equipped with polarographic sensor to measure the dissolved oxygen content. The manual salinity & barometric pressure compensation helps in accurate measurement of dissolved oxygen. The system menu of dissolved oxygen meter can set 9 parameters such as stability conditions, calibration points etc. This meter stores and recalls up to 500 sets of data & data is transferrable to PC via USB interface.
SKU Code: LD-LBDO-A11
| Power | DC 5 V, use of AC adapter, AC 220 V / 50 Hz |
| Memory | Stores up to 50 data sets |
| Weight | 1.5 kg |
| Display | Backlit LCD (130 × 110 mm) |
| Connector | 6 pin mini plug |
| Power off | Manual or automatic (10, 20, 30 minutes) |
| Resolution | 0.01 mg / L |
| Sensor type | Polarographic DO probe |
| System menu | Allows setting of 9 parameters |
| Reset function | Yes |
| Calibration due | 0 to 31 days |
| Calibration points | 1 - 2 points |
| Data hold function | Manual or automatic endpoint detection |
| Salinity correction | 0 - 50 g / L |
| Stability conditions | Low or high |
| Dissolved oxygen range | 0.0 to 20.0 mg / L (or ppm) |
| Dimension (L × W × H) | 210 × 188 × 60 mm |
| Dissolved oxygen accuracy | ± 0.2 mg / L |
| Barometric pressure correction | 60.0 to 112.5 kPa, 450 to 850 mmHg |
| Temperature compensation range | 0 to 50 °C, 32 to 122 °F |
| % of saturation of oxygen range | 0.0 to 200.0 % |
| % of saturation of oxygen accuracy | ± 2.0 % F.S. |
| % of saturation of oxygen resolution | 0.1, 1 % |
| Dissolved oxygen probe |
| Dissolved oxygen Electrolyte solution |
| Membrane cap |
| DC 9 V power adapter |
| Benchtop dissolved oxygen meter has applications in water & waste water management industry, environmental monitoring, surface ground water, research & development, education to detect content of dissolved oxygen. |
