Features

  • Common features
  • Calibration due reminder informs operator to calibrate the meter regularly
  • Stability indicator displays the status of current measurement
  • Auto hold function freezes stable, final readings for better viewing and recording
  • 1 to 5 points push button calibration to automatically identify calibration solutions
  • Selectable temperature units (°C or °F) for different application requirements
  • Expanded memory stores and recalls up to 500 readings
  • Calibration report provides details of calibration standard and cell constant
  • Help message as an operational guide, helps users for quick access to the parameters
  • Reset function automatically resumes all settings back to factory default options
  • Store data is transferrable into computer via USB communication interface
  • Conductivity / TDS/Salinity/ Temperature
  • Conductivity: 1 to 5 point calibration with automatically identification of calibration solutions
  • Temperature: Can select cell constant (0.1/1/10) and normalization temperature 20°C or 25°C
  • TDS and Salinity: TDS conversion factor, seawater, practical salinity measurements mode to meet different water quality measurement requirements
  • linear and pure water compensation improves the measurement accuracy

Portable Conductivity Meter LD-LPCM-A13

Portable Conductivity MeterLD-LPCM-A13is adapted with different modes for measuring quality of water on parameters such as conductivity, total dissolved solids, salinity, resistivity and temperature. Due to its portable design, it is suitable for outdoor measurements i.e. on site water testing, remote area water testing and for research purpose. It is reliable and user friendly.

SKU Code: LD-LPCM-A13

Also Available in below capacities

Conductivity :
TDS
Power 3 × 1.5 V AA batteries or DC 5 V power adapter
Memory 500 data sets
Weight 300 g
Salinity
Connector 6 pin mini plug
Data hold Manual or auto-end point
TDS factor 0.01 to 1.00 (Default 0.5)
Resistivity
Temperature
Conductivity
TDS accuracy ±1 % F.S
Cell constant K= 0.1, 1, 10 or custom
Power Control Manual or Automatic (10, 20 or 30 minutes after last key pressed)
TDS resolution 0.01, 0.1, 1
Calibration due 1 to 31 days or off
Salinity accuracy ±1% F.S
Salinity resolution 0.01, 0.1, 1
Resistivity accuracy ±1% F.S
Stability conditions Low or high
Reference temperature 20 °C or 25 °C
Conductivity accuracy ±0.5% F.S
Resistivity resolution 0.01, 0.1, 1
Temperature resolution 0.1 °C, 0.1 °F
Conductivity resolution 0.001, 0.01, 0.1, 1
Dimension (L × W × H) 170 × 85 × 30 mm
Temperature coefficient Linear and Pure water compensation
Temperature compensation 0 to 100 °C, 32 to 212 ° F, Manual or Automatic
Salinity measurement modes Practical Salinity (psu) or Natural Seawater (ppt)
Temperature calibration points 1 point
Temperature measuring accuracy ± °0.5 C, ± 0.9 °F
Conductivity calibration points 1 to 5 points
Conductivity calibration solutions 10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom
Used for quality testing of water on different parameters in research and development labs, water resources and plants in nearby or remote area.

Similar Products