Features

  • Water Purification is unique and easy-to-install prefiltration pack system
  • Integrate with EDI module, without softener, chemical regeneration and replacing any DI cartridge
  • Self-maintenance of the reverse osmosis membrane
  • The system recirculates water when the system is not in use in order to maintain water quality
  • Built in 20 liters Pressure Tank and 20 liters plastic pressure water tank
  • Designed with graphic display clearly indicates all parameters
  • 3 doors and easy to replacing cartridge design, convenient to maintain system and replace cartridges
  • RO module with DOWs membrane, ensure long life, stable operation and high desalinization rate
  • Designed with multiple alarm function
  • Offers data storage and RS 232/USB communication port
  • Equipped with range of filters and cartridges are available for the system to match your water requirements of bacteria-free, pyrogen-free or nuclease-free
  • Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF
  • Easy to maintain and operate

Water Purification System LD-LWPS-C11

Water Purification System LD-LWPS-C11 is top choice of high flux ultrapure water system from tap to ultrapure water, integrating pretreatment, RO and terminal filter into one. Its output ranges up to 90 liters/hour and offers flow rate up to 2 liters/minute (when tank is full). Features with tap water inlet, it can produce second stage RO water and EDI module, center EDI ultrapure water system. The 2nd stage RO water’s conductivity can stay 1 to 5 µs/cm, and the ultrapure water’s resistivity is more absolutely to 18.2 MΩ.cm. It completely meets the highest grades and offers ASTM standards. Designed with 7.0 inch touch LCD display, to detect the quality of 3 way water sensor, 2 way flow sensor ultrapure water. Equipped with Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF. It is auto self-flushing of RO membrane function, extend RO membrane life.

SKU Code: LD-LWPS-C11

Also Available in below capacities

Water quality : One stage (Type I)
Water quality : Two stage(Type III and type I)
EDI Resistivity >10.2 MΩ cm TOC: < 30ppb Silicone rejection rate: >99.9%
Weight about 75 kg
Dimension 610 × 585 × 1580 mm
Power Supply AC110 to 240 V, 50/60 Hz
RO Water Quality Conductivity 1st stage RO water: Feed water Conductivity ×5 % Conductivity 2nd stage RO water: 1 to 5 µs/cm
Power Consumption 480 W
Output ultrapure water Up to 2 liters/minute (when tank is full)
Standard configuration Main body (Including 1 set of cartridge) +20 liters Pressure Tank and 20 liters pressure tank
Feed water requirements Tap water, Temperature 5 to 45°C, Pressure 1.0 to 4.0 Kgf/cm2
Ultrapure Water Quality Resistivity (25°C) 18.2 MΩ cm TOC: < 3ppb Bacteria: <0.1 cfu/ml Particle (>0.2 µm): <1/ml Endotoxin: <0.001EU/ml RNases: <1pg/ml DNases: <5pg/ml
Output 2nd stage RO water 90 liters/hour
Water Purification System is used in Molecular biology and life sciences, Animal cells and plant cell culture, Tissue culture, IVF, Electrophoresis, gel analysis, medium preparation etc. across Healthcare, Food & Beverage and Biochemistry microanalysis etc.

Similar Products