Water Purification SystemLD-LWPS-A11mainly consists of two stages of water quality and its feed water is tap water. It follows type III and type I systems. Features pretreatment system, RO system, ultrapure water system conveying unit and control system. Fully automatic control over the whole process, e.g. automatic water preparation, when water tank is full, automatically stop the system and cut off the power and water. Built-in RO membrane timing automatic flush procedures, and manual RO membrane cleaning button is available.
SKU Code: LD-LWPS-A11
| TOC | < 5ppb |
| DNases | < 4 pg/μl |
| RNases | < 0.01 ng/ml |
| Bacteria | < 0.1 cfu/ml |
| Humidity | 10 % ~ 80 % |
| Particle | ( > 0.22μm) <1/ml |
| Endotoxin | < 0.001 EU/ml |
| Absorbance | (254nm,1cm optical distance) < 0.001 EU/ml |
| Conectivity | <5 μs/cm@25℃ |
| Resistivity | 18.25 MΩ.cm @ 25 ℃ |
| Temperature | 5 ℃ ~ 40 ℃ |
| Power supply | 230 V/50 Hz 150 W |
| Water quality | Two stage(Type III and type I) |
| Micro filtration | Millipore Millipak 0.22μm membrane or hollowed fiber membrane filter |
| Reactive Silica(SiO2) | < 0.01 ppm |
| Water production rate | Type 1 water flow rate: 1-1.5L/min |
| Main body Dimension (L × W × H) | 340 × 550 × 530 mm (bench type) |
| Used for Medical device injection to human body, DNA/RHA preparation, DNA testing, HPLC (test and analysis of amino acid, penicillin; Organic ingredients), GCMS, ICP, IC, gas chromatography, AAS etc. |
