Features

  • Advanced Single Pass reverse osmosis system for excellent water quality
  • Equipped with 30 L water holding tank
  • Type II level water produced TOC level < 20 ppb
  • Source of inlet water – Tap water
  • Benchtop model
  • LCD display to monitor the intake of water pressure and various parameters intuitively
  • Anti-fouling RO membrane prevention programme
  • Online monitoring of water resistance
  • Ease of cleansing , disinfecting and draining waste water
  • Micro filter membrane to filter out pollutants
  • Automatic RO membrane antiscale flushing to extend the life of the RO membrane

Type II Water Purification System LD-LTWP-A11

Type II Water Purification System LTWP -A11 is a 30 L capacited modular design which meets the needs of basic laboratory water purifier. It provides Type II level water with consistency and reliability with a TOC level of < 20 ppb. Remove approximately 98% of inorganic ions and 99% of all dissolved organic substances.This system produce and reject water at the same time. Equipped with easy replaceable filters. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance.

SKU Code: LD-LTWP-A11

Also Available in below capacities

Output of Pure water : ≥ 10 L / hr.
Output of Pure water : ≥ 20 L / hr.
Output of Pure water : ≥ 30 L / hr.
Output of Pure water : ≥ 40 L / hr.
Output of Pure water : ≥ 50 L / hr.
Output of Pure water : ≥ 10 L / hr.
TOC < 20 ppb
Power ≥ 150 W
Weight 35 kg
Process Single Pass RO system
Water Type Type II
Heavy metal < 0.01 ppm
Configuration Benchtop
Water Tank capacity 30 L
Output of Pure water ≥ 20 L / hr.
Absorbance ( 254 nm ) ≤ 0.001
Resistivity at 25 °C 10-16 M Ω. cm
Conductivity at 25 °C ≤ 10 µs / cm
Electrical requirements 220 V / 50 Hz
Dimensions ( L x W x H ) 340 x 550 x 530 mm
Reactive Silica ( SiO2 ) < 0.01 ppm
Output of Ultrapure water ≥ 1- 1.5 L / min

Similar Products