Features

  • Radio Frequency Identification Chip integrated
  • Advanced Double Pass reverse osmosis system for excellent water quality
  • 2 levels of water purification with high recovery rate
  • Online monitoring of water resistance
  • Equipped with 30 L water holding tank
  • Least TOC level < 3ppb
  • Source of inlet water – Tap water
  • Benchtop model
  • LCD display to monitor the intake of water pressure and various parameters intuitively
  • Programmed water shortage protection alarm
  • Anti-fouling RO membrane prevention programme
  • Ease of cleansing , disinfecting and draining waste water
  • Micro filter membrane to filter out pollutants
  • Automatic RO membrane antiscale flushing to extend the life of the RO membrane

Radio Frequency Identification Water Purification System LD-LRFW-B11

Radio Frequency Identification Water Purification SystemLD-LRFW-B11is a 30 L capacited revolutionary, modular design which helps in elimination of large amount of salts and other minerals from water using 2 stages of RO with the least TOC level i.e. < 3 ppb. Here the concentrate or reject stream is fed into a second RO system to maximize water recovery. The unique feature of this model is that it’s equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance

SKU Code: LD-LRFW-B11

Also Available in below capacities

Output of Pure water : ≥ 10 L / hr.
Output of Pure water : ≥ 20 L / hr.
Output of Pure water : ≥ 30 L / hr.
Output of Pure water : ≥ 40 L / hr.
Output of Pure water : ≥ 50 L / hr.
Output of Pure water : ≥ 10 L / hr.
TOC < 3 ppb
Power ≥ 200 W
Weight 45 kg
Process Double Pass RO system
Bacteria < 1 cfu / ml
Heavy metal < 0.01 ppm
Configuration Benchtop
Water Tank capacity 30 L
Output of Pure water ≥ 20 L / hr.
Absorbance ( 254 nm ) ≤ 0.001
Pyrogens / Endotoxins < 0.025 EU / ml
Resistivity at 25 °C 18.25 M Ω. cm
Conductivity at 25 °C ≤ 5 µs / cm
Electrical requirements 220 V / 50 Hz
Dimensions ( L x W x H ) 340 x 550 x 530 mm
Particles ( > 0.22 µm ) < 1 / ml
Reactive Silica ( SiO2 ) < 0.01 ppm
Output of Ultrapure water ≥ 1- 1.5 L / min
Used in PCR / DNA preparation, HPLC, LC-MS, electrophoresis, chemical analysis experiment, protein analysis

Similar Products