Vacuum Leak Tester LD-TVLT-A10
SKU: LD-TVLT-A10Vacuum Leak TesterLD-TVLT-A10is a benchtop leakage tester with digital LCD display and operation panel to set accurate vacuum degree and vacuum retention time. Use of top quality parts & components ensures reliable overall product performance. Air compressor is used to compressed air during test. It is in accordance with ASTM D3078 international standard.
- ✓ Microprocessor controlled system
- ✓ LCD display & PVC operation panel
- ✓ Wall thickness of vacuum chamber 15 mm
- ✓ About 20 mm water level above porous compression plate
- ✓ 10 minutes interval after turning off power
- ✓ Automatic compensation of constant pressure
- ✓ Easy to use & maintain
Also available in:
The maximum temperature : 300°C
Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
Cutting tool distance : 16 mm
Measuring range : 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)
Measuring range : 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
Vacuum degree : 0 to 90 KPa
| Accuracy | 1 % FS |
| Dimension | 500 × 500 × 700 mm |
| Net weight | About 17 kg |
| Resolution | 0.1 KPa |
| Gross weight | About 23 kg |
| Power supply | AC 220 V, 50 Hz |
| Vacuum degree | 0 to 90 KPa |
| Gas supply pressure | 0.2 to 0.5 MPa |
| Vacuum chamber size | 300 × 350 mm |
| Vacuum chamber effective size | 270 × 210 mm |
Used in leak testing of pouches, bottles , pipes, canes & boxes of foodstuff, pharmaceutical, medical, daily chemistry, electronic compounds, stationary & others industries. Also used in leak testing (seal performance) of specimens after falling tests and pressure resistance (compression) tests.
Similar Products
Aging Oven TAO-A10
✓ The maximum temperature : 300°C
✓ Temperature fluctuation : Within ± 0.5°C
Charpy/ Izod Impact Tester TCI-A10
✓ Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
✓ Impact energy (Izod) : 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
Falling Weight Impact Tester TFWT-A10
✓ Temperature range : 10 to 35°C
✓ Maximum falling height : 2000 mm
Heat sealer THS-A10
✓ Seal temperature : Room temperature -250°C
✓ Control accuracy : ± 0.2°C
Lasting adhesive tester TLAT-A10
✓ Standard roller : 2000 ± 50 g
✓ Testing stations : 3
