Vicat softening temperature & HDT machine LD-TVHT-A10
SKU: LD-TVHT-A10Vicat softening temperature & HDT testing machineLD-TVHT-A10with light weight and compact design, is adopted with advanced PID technology & photoelectric technology to control rise in temperature. Mainly used for the determination of temperature of thermal deformation (deflection) & vicat softening point of nonmetallic materials such as plastic, rubber, insulating materials. It is in accordance with international ISO, ASTM standards.
- ✓ Adopted with high precision temperature sensor
- ✓ Protection against over temperature
- ✓ Adopted with advanced PID technology & photoelectric technology
- ✓ Ensures error of heating speed is less than 0.5°C
- ✓ Software protection
- ✓ Digital dial gauge for accurate measurement
Also available in:
The maximum temperature : 300°C
Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
Cutting tool distance : 16 mm
Measuring range : 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)
Measuring range : 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
Vacuum degree : 0 to 90 KPa
| Heating rate | 50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min) |
| Power supply | AC220V, 50 Hz |
| Test station | 3 stations |
| Cooling method | Wind cooling, neutral cooling, fast water cooling |
| Heating medium | Methyl silicon oil |
| Deformation accuracy | 0.01 mm |
| Range of deformation | 0 to 10 mm |
| Operating temperature | Ambient temperature to 300°C |
| Deformation measurement method | Digi gauge |
Vicat softening temperature & HDT testing machine is used in chemical & plastic industry, research institutes.
Similar Products
Aging Oven TAO-A10
✓ The maximum temperature : 300°C
✓ Temperature fluctuation : Within ± 0.5°C
Charpy/ Izod Impact Tester TCI-A10
✓ Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
✓ Impact energy (Izod) : 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
Falling Weight Impact Tester TFWT-A10
✓ Temperature range : 10 to 35°C
✓ Maximum falling height : 2000 mm
Heat sealer THS-A10
✓ Seal temperature : Room temperature -250°C
✓ Control accuracy : ± 0.2°C
Lasting adhesive tester TLAT-A10
✓ Standard roller : 2000 ± 50 g
✓ Testing stations : 3
