Melt flow Indexer LD-TMFI-A10
SKU: LD-TMFI-A10Melt flow IndexerLD-TMFI-A10comes in compact structure & attractive design & with high quality performance & reliable results, it can measure (melt mass flow rate) MFR, (melt volume flow rate) MVR of the sample, melt density of thermos-resins. Adopted with standard module combination structure, it can upgrade and changed the type directly, with accuracy of the results. It is designed in accordance with latest ISO international standards.
- ✓ LCD digital display
- ✓ Can perform three measurements: MFR/MVR/ Density
- ✓ Can cut the material manually or automatically
- ✓ Adopted with Microprocessor PID temperature controller
- ✓ Cleaning & calibration accessories for reliable performance
- ✓ Easy to use/operate
Also available in:
The maximum temperature : 300°C
Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
Cutting tool distance : 16 mm
Measuring range : 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)
Measuring range : 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
Vacuum degree : 0 to 90 KPa
| Power | 550 W |
| Weights | 0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 10.0 kg, 12.5 kg, 21.6 kg |
| Accuracy | 0.005 |
| Dimension | 600×400×500 mm |
| Net weight | 85 kg |
| Resolution | 0.1°C |
| Gross weight | 98 kg |
| Power supply | 220/ 110 V, 50/60 Hz |
| Measuring rate | 0.001 S |
| Piston dimension | Nil |
| Temperature range | 50 to 400°C |
| Temperature precision | ± 0.5°C |
| Material canister dimension | Nil |
Melt flow indexer is used to determine the melt mass-flow (MFR), the melt volume-flow rate (MFV) and the melt density of thermos-resins, polycarbonates, nylon & plastic material.
Similar Products
Aging Oven TAO-A10
✓ The maximum temperature : 300°C
✓ Temperature fluctuation : Within ± 0.5°C
Charpy/ Izod Impact Tester TCI-A10
✓ Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
✓ Impact energy (Izod) : 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
Falling Weight Impact Tester TFWT-A10
✓ Temperature range : 10 to 35°C
✓ Maximum falling height : 2000 mm
Heat sealer THS-A10
✓ Seal temperature : Room temperature -250°C
✓ Control accuracy : ± 0.2°C
Lasting adhesive tester TLAT-A10
✓ Standard roller : 2000 ± 50 g
✓ Testing stations : 3
