Features

  • Trinocular viewing head, 30° inclined
  • 5.1 MP CMOS senor to be mounted on top
  • Equipped with polarizer and analyzer for polarizing effect
  • Revolving round stage Diameter Φ150 mm, 360° graduated
  • Optical compensator: λ Slip (first class red), 1/4λ Slip, quartz wedge
  • Polarizer and Analyzer attachment with Bertrand lens
  • Dual illumination system, i.e. Transmitted and Reflected

Polarizing Microscope LD-LPM-B10

Polarizing Microscope LD-LPM-B10 is an upright microscope with trinocular viewing head inclined at 30°. The 5.1 MP CMOS senor to be mounted on top for capturing still images and video. It offers dual illumination system, i.e. Transmitted and reflected illumination for carrying observation. The focusing system offers, coaxial coarse fine focusing system with adjustable tension and up stop, 2 µm minimum fine focusing division. It comes with sliding in/out of optical path polarizer, located on the top of collector. The 0°-90° gradation rotatable analyzer is used to observe single polarization. High quality and contrast images are produced using this microscope.

SKU Code: LD-LPM-B10

Also Available in below capacities

Viewing Head : Siedentopf type binocular head, 30° inclined, eyepiece rotation 360º
Interpupillary adjustable distance 50 to 75 mm
Viewing Head : Polarizing siedentopf trinocular head 30° inclined, eyepiece rotation 360°
Interpupillary adjustable distance 48 to 76 mm
Light distribution 100:1 (100% for eyepiece)
Weight 12 kg
Exposure 0.294 ms to 2000 ms
Eyepiece Eyepiece WF10X/18 with Division eyepiece 10X/18 mm 0.10 mm/div
Focusing Coaxial coarse/fine focus system, with tension adjustable and limit stopper, minimum division of fine focusing: 0.002 mm
Condenser Abbe condenser NA 1.25 with rack and pinion adjustable mechanism
Dimension 400×280×530 mm
Nosepiece Quadruple (Frontward ball bearing inner locating)
Objectives Strain-free plan achromatic objective (no cover glass) PL 5X/0.12, PL L 10X/0.25, PL L40X/0.60 (spring), PL L 60X/0.75 (spring)
Pixel Size 2.2 × 2.2 µm
Sensitivity 0.53 V / lux-sec
Viewing head Trinocular viewing head, 30° inclined
Camera Sensor 1 / 2.5 inch (H×V) (5.7 mm × 4.28 mm)
Dynamic Range 66.5 dB
Optical System Finite optical system
Spectral Range 380 to 650 nm (IR Fitter)
Camera Sensor Type CMOS (Micron) APTINA MT9P001
Frame Size and Rate 5 fps @2592×1944, 18 fps @1280×960, 60 fps @640×480
Polarizing Attachment Polarizer: Sliding in/out of optical path, located on the top of collector Analyzer: Rotatable analyzer with gradation 0°-90° Bertrand lens: Bertrand lens, sliding in/out of optical path Optical Compensator: λ Slip (first class red), 1/4λ Slip, Quartz wedge
Revolving round stage Rotatable stage, Diameter Φ150 mm, 360° graduated (in 1degree increments), minimum retardation resolution 6 inch center adjustable and with tightened
Reflected Illumination Rotatable Polarizer 6V, 20 W, halogen lamp, adjustable brightness
Transmitted Illumination Polarizer 360° rotatable, have 0, 90, 180, 270 four scale, Collector for halogen lamp illumination, Illumination 6V, 20W, halogen lamp, adjustable brightness
Camera Maximum Resolution 2592 × 1944 (5.1 MP)
Signal To Noise Ratio (SNR) 40.5 dB
Polarizing Microscope used in electronics, geology, metallurgy, mining, medicine, and pharmaceutical studies to analyze depth and details of the specimen under observation.

Similar Products