Dry bath incubator LD-LDBI-B10 series is a microprocessor-controlled incubator unit with a temperature range of 5°C to 120°C. Features an aluminium heating block for rapid heating of samples, adding to its usage as a mini water bath. Temperature sensor allows direct temperature control in the sample vessel. Control knob aids in regulation of speed and temperature with maintenance of temperature uniformity at 0.2°C and 0.5°C. Integrated with a safety circuit for end user protection.
SKU Code: LD-LDBI-B10
| Weight | 1.5 kg |
| Voltage | 220 V - 240 V / 115 V |
| Frequency | 50 Hz / 60 Hz |
| Time range | 1 min - 99 hrs. 59 mins |
| Heat output | 165 W |
| Heating rate | 5 K/min |
| Block capacity | 1 Block |
| Protection class | IP 21 |
| Set-up plate material | Aluminum alloy |
| Dimensions (W x H x D) | 152 x 86 x 190 mm |
| Set-up plate dimensions | 96 mm x 76 mm |
| Heating temperature range | 5 °C – 120 °C |
| Permissible relative humidity | 0.8 |
| Temperature Uniformity >60°C | 0.2 K |
| Temperature Uniformity < 60°C | 0.2 K |
| Permissible ambient temperature | 5 °C – 40 °C |
| Fixed safety circuit temperature | 180 °C |
| Adjustment and display resolution | 0.1 K |
| Temperature stability within the blocks > 60°C | ± 0.2 °C |
| Temperature stability within the blocks at < 60°C | ± 0.2 °C |
| Used for In-Vitro diagnostic of specimens such as enzyme reaction, incubation and activation processes, coagulation studies, restriction digest and polymerase chain reaction, Hot Start thermocycler reactions. |
