Portable 2 in 1 gas detector LD-LPTG-A10
SKU: LD-LPTG-A10Portable 2 in 1 gas detectorLD-LPTG-A10is a lightweight, hand held design gas detector. It synchronously detects concentration of CO2 gas and that of another gas like O2, CO, NH3, and H2S. LCD display shows real time measurement values. Used in field detection of multiple gases for quality testing and research purpose.
- ✓ Equipped with two different types of sensors
- ✓ Synchronous detection of two gases at a time
- ✓ Long probe for narrow room
- ✓ Small volume, Easy to carry
- ✓ Automatic self calibration
Also available in:
Measurement principle : Non-dispersive infrared (NDIR)
Sampling method : Diffusion
Sampling method : Diffusion
Sampling : With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection
Sampling Method : Diffusion
Gas detected : NO2
| Weight | About 250 g (includes detector, batteries) |
| Display | LCD display |
| HS Code | 9027100090 |
| Calibration | CO2：0.04 % revise the zero point outdoors, O2：20.9 % revise the zero point outdoors |
| Sensor type | CO2: solid electrolyte sensor, O2：electrochemical sensor |
| Power supply | #5 dry cell, 4/AC 100 to 250 V |
| Detection range | CO2：0.04 to 5.00 % and O2：0.0 to 30.0 % |
| Sampling method | Diffusion |
| Battery shelf life | About 20 hours (when using alkaline dry batteries) |
| Detection accuracy | CO2：± 30 % rdg (rdg = reading) and O2：± 3 % F.S. (F.S. = full scale) |
| Display resolution | CO2：0.01 % and O2：0.1 % |
| Operation humidity | < 90 % RH (non-condensation) |
| Operation temperature | -10 to 50 °C |
| Dimension Detector (W*D*H) | 28 × 27 × 170 mm |
| Dimension Host Machine (W*D*H) | 76 × 27 × 145 mm |
Used in bio fuel plants, greenhouse, agriculture, construction, for on field testing of chemical gases and others.
Similar Products
Handheld C2H4 Ethylene Gas Detector LEGD-A10
✓ Sampling : With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection
✓ Gas : Ethylene C2H4
Portable infrared gas detector LIGD-A10
✓ Measurement principle : Non-dispersive infrared (NDIR)
✓ Gas Detected : SF6: 0 to 50 ppm range/ 0 to 1000 ppm range (as per req.)
Portable 10 in 1 Multi Gas Detector LMGD-A10
✓ Gas Detected : O2 CH4 CO2 VOC CO H2S SO2 CL2 NO2 NH3
✓ Detection principle : Electrochemical principle (O2 CO H2S SO2 CL2 NO2 NH3)
Portable Multiple Gas Detector LPMG-A10
✓ Sampling Method : Diffusion
✓ Working conditions : Temperature -20 to 50°C Pressure 0.9 to 1.1 (standard atmospheric pressure) Humidity
Portable Single Gas Detector LPSG-A10
✓ Sampling method : Diffusion
✓ Measurement principle : Electrochemical (oxygen, toxic gases), Catalytic combustion (flammable gases), Infrared principle (carbon dioxide gas)
