Portable infrared gas detector LD-LIGD-A10

SKU: LD-LIGD-A10

Portable infrared gas detectorLD-LIGD-A10is a hand-held SF6 (sulfur hexafluoride) Gas detector for continuous measurement of gas. Adopted with imported gas infrared sensor, it utilizes unique method of data processing. Light emitting organic matter OLED screen, gives clear display in absence of light and when operated during dark. With Non-dispersive infrared (NDIR) principle, the detection resolution of leakage can reach up to 0.1ppm.

✓ Zero drift automatic modification
✓ Imported with long shelf life sensors
✓ Instant response and recovery rate
✓ Multi-level speech and light alarm
✓ High sensitivity data
✓ USB or AC adopter charging mode
✓ Data Analysis, reading by PC software through USB
✓ Storage and inquiry of measurement data

Also available in:

Measurement principle : Non-dispersive infrared (NDIR) Sampling method : Diffusion Sampling method : Diffusion Sampling : With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection Sampling Method : Diffusion Gas detected : NO₂

Request A Quote Download Catalog

Weight	0.7 kg
Display	OLED self-luminous with low power consumption, high brightness
HS Code	9027100090
Dimension	500 × 290 × 180 mm
Shelf life	>10 years
Gas Detected	SF6: 0 to 50 ppm range/ 0 to 1000 ppm range (as per req.)
Power supply	4.2 V, internal lithium battery power supply, 2200 mAh
Warm-up time	100 s
Response time	1 to 5 s
Sampling mode	Pumping type
Detection Resolution	0.1ppm
Detection Uncertainty	<1.5 % F.S
Measurement principle	Non-dispersive infrared (NDIR)
Operation temperature	-10 to 60℃
Probe unit rod length	22 cm

Used to measure the gas leakage of switchgear, GIS, circuit breaker etc. in electronic industry, also used in greenhouse, painting, chemical industry.

Similar Products

Handheld C2H4 Ethylene Gas Detector LEGD-A10 ✓ Sampling : With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection ✓ Gas : Ethylene C2H4

Portable 10 in 1 Multi Gas Detector LMGD-A10 ✓ Gas Detected : O2 CH4 CO2 VOC CO H2S SO2 CL2 NO2 NH3 ✓ Detection principle : Electrochemical principle (O2 CO H2S SO2 CL2 NO2 NH3)

Portable Multiple Gas Detector LPMG-A10 ✓ Sampling Method : Diffusion ✓ Working conditions : Temperature -20 to 50°C Pressure 0.9 to 1.1 (standard atmospheric pressure) Humidity

Portable Single Gas Detector LPSG-A10 ✓ Sampling method : Diffusion ✓ Measurement principle : Electrochemical (oxygen, toxic gases), Catalytic combustion (flammable gases), Infrared principle (carbon dioxide gas)