Multi-range pocket TDS testerLD-LPTS-A20comes with 1 - 3 points calibration system. Equipped with platinum sensor provides fast and reliable results. The battery indicator shows the remaining battery capacity on display screen. The System menu allows setting of up to 5 parameters. Equipped with reset features. It can measure TDS content of all liquids and low, mid, high concentration solutions.
| Power | 2 × 1.5 V “AAA” |
| Weight | 100 g |
| Display | LCD screen |
| Connector | 6 pin |
| Power off | Manual or automatic (8 minutes after last key is pressed) |
| TDS range | 0 - 20 ppt |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Battery life | Approximately 150 hours |
| TDS accuracy | ± 1 % F.S. |
| TDS type range | Low range TDS |
| Type of sensor | Platinum sensor |
| Calibration points | 1 - 3 points |
| Data hold function | Manual |
| Calibration solutions | 100 ppm, 1000 ppm, 10 ppt |
| Dimension (L × dia.) | 185 × 40 mm |
| Operating temperature | 0 °C - 60 °C, 32 °F - 140 °F |
| Temperature coefficient | 2 % per °C |
| Temperature compensation | 0 °C - 60 °C, Automatic |
| Normalization temperature | 25 °C |
Multi-range pocket TDS tester can measure TDS content of solutions, liquids used in electroplating & printing industry, beverage industry, water & waste water, aquarium units.
Portable Ion Meter LPIM-A10
✓ pH Range : -2.000 to 20.000 pH
✓ pH Resolution : 0.001 / 0.01 / 0.1, selectable
Portable Turbidity Meter LTM-A10
✓ Measuring range (NTU) : 0 to 200
✓ Minimum readout value (NTU) : 0.1
Portable Turbidity Meter LTM-A11
✓ Measuring range (NTU) : 0 to 100,0 to 200
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A12
✓ Measuring range (NTU) : 0 to 100,100 to 400
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A13
✓ Measuring range (NTU) : 0 to 100,100 to 500
✓ Minimum readout value (NTU) : 0.01, 0.1