Pocket TDS testerLD-LPTS-A10is equipped with platinum sensor & 1 point push button calibration system. It comes with low TDS measurement range. It is easy to use & with waterproof features design it provides protection against harsh conditions. The standard platinum sensor provides fast and reliable measuring results. Total dissolved solid content present in drinking water, waste water, swimming pool & aquarium water can be measured using pocket TDS meter.
| Power | 3 × 1.5 V “G13A” |
| Weight | 100 g |
| Display | LCD screen |
| Connector | 6 pin |
| Power off | Manual or automatic (8 minutes after last key is pressed) |
| TDS range | 0.5 - 100.0 ppm |
| TDS factor | 0.4 to 1.0 (default 0.5) |
| Battery life | Approximately 150 hours |
| TDS accuracy | ± 1 % F.S. |
| TDS type range | Low range TDS |
| Type of sensor | Platinum sensor |
| Calibration points | 1 point |
| Data hold function | Manual |
| Calibration solutions | 71.8 ppm |
| Dimension (L × dia.) | 185 × 40 mm |
| Operating temperature | 0 °C - 60 °C, 32 °F - 140 °F |
| Temperature coefficient | 2 % per °C |
| Temperature compensation | 0 °C - 50 °C, Automatic |
| Normalization temperature | 25 °C |
Pocket TDS tester is used to measure TDS content in waste water, swimming pool & aquarium, pure water, drinking water. It is also used in educational and other industrial applications for TDS measurement from test samples.
Portable Ion Meter LPIM-A10
✓ pH Range : -2.000 to 20.000 pH
✓ pH Resolution : 0.001 / 0.01 / 0.1, selectable
Portable Turbidity Meter LTM-A10
✓ Measuring range (NTU) : 0 to 200
✓ Minimum readout value (NTU) : 0.1
Portable Turbidity Meter LTM-A11
✓ Measuring range (NTU) : 0 to 100,0 to 200
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A12
✓ Measuring range (NTU) : 0 to 100,100 to 400
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A13
✓ Measuring range (NTU) : 0 to 100,100 to 500
✓ Minimum readout value (NTU) : 0.01, 0.1
