[email protected]
+44 20 3371 7320 Mon - Sat: 9:00 AM - 6:00 PM
Get Quote
Home › All Products › Water Testing › Online Conductivity Controller LD-LOCC-A10
Online Conductivity Controller LD-LOCC-A10

Online Conductivity Controller LD-LOCC-A10

SKU: LD-LOCC-A10

Online Conductivity ControllerLD-LOCC-A10features 3 points conductivity calibration system, TDS measurement mode, and 4 to 20 mA output signal transmitter. The large and clear back light LCD displays Calibration and setup values, Temperature values, ATC (automatic temperature compensation) values, high and low limit of measurement. This controller measures Conductivity and TDS values in µS/ cm, and mS/ cm units.

  • ✓ Equipped with industrial conductivity electrode
  • ✓ 1 to 3 conductivity calibration points, 1 temperature calibration point
  • ✓ Selectable temperature units °C or °F for diff. applications
  • ✓ System menu allows setting of up to 9 parameters
  • ✓ Reset features to resumes all setting back to default
  • ✓ ATC mode for accurate readings over entire range
  • ✓ Low and high alarm limits set automatically activate an external device
  • ✓ Manual temperature calibration improves accuracy
Also available in:
Conductivity measurement range : 0.01 to 20.00, 200.0, 2000 µS/ cm, 20.00, 200.0 mS/ cm
Request A Quote Download Catalog
LoadMax. 500 Ω
PowerDC 24 V
Weight350 g
DisplayLCD
InterfaceRS485
TDS factor0.1 to 1.0
TDS accuracy±1 % F.S.
Cell constantK= 0.1, 1, 10
Signal output4 to 200 mA
Dimension (L*W*H)96 × 96 × 75 mm
Connection terminalsDetachable screw terminals
Temperature accuracy1°C
Conductivity accuracy±1 % F.S.
Reference temperature25°C
TDS measurement range0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
Temperature resolution0.1°C
Conductivity resolution0.001/ 0.01/ 0.1/ 1
Environmental conditionsAmbient temperature to ≤ 60°C, RH ≤ 80%
Temperature compensationAutomatic, 0 to 100°C , 32 to 212°F
Low and high alarm limits0.02 uS/ cm to 20.0 mS/ cm, selectable
Temperature measurement range0 to 100°C, 32 to 212°F
Conductivity measurement range0.01 to 20.00, 200.0, 2000 µS/ cm, 20.00, 200.0 mS/ cm
Temperature calibration rangeMeasured value ± 10°C
Temperature calibration points1 point
Conductivity calibration points1 to 3 points
Conductivity calibration solutions84 µS/ cm, 1413 µS/ cm, 12.88 mS/ cm,111.8 mS/ cm

Used to measure conductivity and TDS values required for quality checking and research purpose across water treatment plants, filtration units, RO treatment plants, Agriculture industry, Aquaculture industry and others.

Similar Products

Portable Ion Meter LPIM-A10 Portable Ion Meter LPIM-A10 ✓ pH Range : -2.000 to 20.000 pH ✓ pH Resolution : 0.001 / 0.01 / 0.1, selectable Portable Turbidity Meter LTM-A10 Portable Turbidity Meter LTM-A10 ✓ Measuring range (NTU) : 0 to 200 ✓ Minimum readout value (NTU) : 0.1 Portable Turbidity Meter LTM-A11 Portable Turbidity Meter LTM-A11 ✓ Measuring range (NTU) : 0 to 100,0 to 200 ✓ Minimum readout value (NTU) : 0.01, 0.1 Portable Turbidity Meter LTM-A12 Portable Turbidity Meter LTM-A12 ✓ Measuring range (NTU) : 0 to 100,100 to 400 ✓ Minimum readout value (NTU) : 0.01, 0.1 Portable Turbidity Meter LTM-A13 Portable Turbidity Meter LTM-A13 ✓ Measuring range (NTU) : 0 to 100,100 to 500 ✓ Minimum readout value (NTU) : 0.01, 0.1