Pocket Dissolved oxygen testerLD-LPKDO-A10is equipped with polarographic sensor to measure dissolved oxygen content. The system menu of dissolved oxygen meter can set 6 parameters which includes the number of calibration points, temperature units etc. It can measure the dissolved oxygen content present in water, waste water, other liquids & solutions.
| Weight | 100 g |
| Connector | 6 pin mini plug |
| Power off | Manual or automatic (8 minute after last key is pressed) |
| Sensor type | Polarographic dissolved oxygen probe |
| Battery life | Approximately 150 hours |
| Reset function | Yes |
| Data hold function | Manual or automatic |
| Salinity correction | 0 - 35 g/L |
| Dimension (L × Dia.) | 175 × 40 mm |
| Dissolved oxygen range | 0.0 to 20.0 mg/L (or ppm) |
| % of saturation of oxygen | 0.0 to 200.0% |
| Dissolved oxygen accuracy | ± 0.5 mg/L |
| Barometric pressure correction | 60.0 to 112.5 kPa, 450 to 850 mmHg |
| Temperature compensation range | 0 °C to 40 °C, 32 °F to 104 °F |
| % Saturation of oxygen accuracy | ± 10 % F.S. |
Pocket Dissolved oxygen tester has applications in water & waste water management industry, aquarium, surface ground water, etc. to detect content of dissolved oxygen.
Portable Ion Meter LPIM-A10
✓ pH Range : -2.000 to 20.000 pH
✓ pH Resolution : 0.001 / 0.01 / 0.1, selectable
Portable Turbidity Meter LTM-A10
✓ Measuring range (NTU) : 0 to 200
✓ Minimum readout value (NTU) : 0.1
Portable Turbidity Meter LTM-A11
✓ Measuring range (NTU) : 0 to 100,0 to 200
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A12
✓ Measuring range (NTU) : 0 to 100,100 to 400
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A13
✓ Measuring range (NTU) : 0 to 100,100 to 500
✓ Minimum readout value (NTU) : 0.01, 0.1
