Pocket Conductivity testerLD-LPCT-A11is equipped with platinum sensor & 1 point push button calibration system. The easy to use pocket conductivity meter comes with waterproof features design for protection against harsh conditions. Conductivity meter on the basis of its low, mid and high conductivity measurement range can be used for measuring conductivity of drinking water, waste water, brine water and liquids with high, low conductivity.
| Power | 3 × 1.5 V “G134” batteries |
| Weight | 100 g |
| Display | LCD screen |
| Power off | Manual or automatic (8 minutes after last key is pressed) |
| Sensor type | Platinum sensor |
| Battery life | Approximately 150 hours |
| Cell constant | K=1 |
| Data hold function | Manual |
| Dimension (L*dia.) | 185 × 40 mm |
| Type of conductivity | Mid-range conductivity |
| Conductivity accuracy | ± 1 % F.S. |
| Temperature coefficient | 2 % per °C |
| Temperature compensation | 0 °C - 50 °C |
| Normalization temperature | 25 °C |
| Conductivity measurement range | 10 to 1999 µS/cm |
| Conductivity calibration points | 1 point |
| Conductivity calibration solutions | 1413 µS/cm |
Pocket Conductivity tester on the basis of its low, mid and high conductivity measurement range can be used for testing conductivity of pure water, drinking water , waste water, brine solutions and liquids.
Portable Ion Meter LPIM-A10
✓ pH Range : -2.000 to 20.000 pH
✓ pH Resolution : 0.001 / 0.01 / 0.1, selectable
Portable Turbidity Meter LTM-A10
✓ Measuring range (NTU) : 0 to 200
✓ Minimum readout value (NTU) : 0.1
Portable Turbidity Meter LTM-A11
✓ Measuring range (NTU) : 0 to 100,0 to 200
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A12
✓ Measuring range (NTU) : 0 to 100,100 to 400
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A13
✓ Measuring range (NTU) : 0 to 100,100 to 500
✓ Minimum readout value (NTU) : 0.01, 0.1
