Benchtop Ion meter for Ag, LD-LBIM-A22

SKU: LD-LBIM-A22

Benchtop Ion meter for Ag,LD-LBIM-A22comes with (Ag) silver ion selective electrode for silver ion concentration measurement. This Ion meter comes with Â± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

✓ Large LCD display
✓ 2 - 5 points calibration from low to high concentration
✓ Direct ion concentration readout for elaborate measurement process
✓ Selectable concentration units from ppm, mg / L, mol / L
✓ mV measurements to check the performance of ion selective electrode
✓ Temperature compensation provides accurate reading over the entire range
✓ Stability indicator to show current measurement status
✓ Calibration due reminder for regular calibration of the meter
✓ Auto hold function to freeze stable reading for better viewing & recording
✓ Automatic electrode diagnosis shows the slope of the sensor
✓ Reset setting function
✓ Expanded memory stores and recalls up to 500 readings
✓ Built â€“in real time clock stamps
✓ USB communication interface to transfer stored data to PC

Also available in:

Ion measurement range : Cl range: 5 × 10⁶ - 1 M, 1.8 - 35500 ppm Ion measurement range : F range: 1 × 10⁶M – saturation, 0.02 ppm to saturation Ion measurement range : Na range: 1 × 10⁵ - 1 M, 0.1 - 23000 ppm Ion measurement range : Ca range: 5 × 10⁷ - 1 M, 0.02 - 4000 ppm Ion measurement range : Br range: 5 × 10⁶ - 1 M, 0.4 - 79900 ppm Ion measurement range : NH₄ range: 5 × 10⁶ – 1 M, 0.1 – 18000 ppm

Request A Quote

Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Memory	Stores up to 500 sets of data
Output	USB communication interface
Weight	1.5 kg
Display	LCD (130 × 110 mm)
mV range	(-1999.9) to 1999.9 mV
Connector	BNC
Power off	Manual or automatic (10,20,30 minutes)
Resolution	0.001, 0.01, 0.1, 1
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Reset function	Yes
Calibration due	0 to 31 days
Compensation mode	Manual or automatic
Calibration points	2 to 5 points
Data hold function	Manual or automatic endpoint detection
Stability condition	Low or high
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
Ion measurement range	Ag range: 1 × 10⁷ - 1 M, 0.01 - 107900 ppm
Temperature resolution	0.1°C
Dimension (L × W × H)	210 × 188 × 60 mm
Ion measurement accuracy	± 1 % F.S.
Temperature compensation	0 to 100 °C, 32 to 212 °F
Temperature measurement range	0 to 105 °C, 32 to 221 °F

Benchtop Ion meter is used to measure the silver ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Similar Products

Portable Ion Meter LPIM-A10 ✓ pH Range : -2.000 to 20.000 pH ✓ pH Resolution : 0.001 / 0.01 / 0.1, selectable

Portable Turbidity Meter LTM-A10 ✓ Measuring range (NTU) : 0 to 200 ✓ Minimum readout value (NTU) : 0.1

Portable Turbidity Meter LTM-A11 ✓ Measuring range (NTU) : 0 to 100,0 to 200 ✓ Minimum readout value (NTU) : 0.01, 0.1

Portable Turbidity Meter LTM-A12 ✓ Measuring range (NTU) : 0 to 100,100 to 400 ✓ Minimum readout value (NTU) : 0.01, 0.1

Portable Turbidity Meter LTM-A13 ✓ Measuring range (NTU) : 0 to 100,100 to 500 ✓ Minimum readout value (NTU) : 0.01, 0.1