Falling Weight Impact TesterLD-TFWT-A10is mainly used to calculate impact resistance of thermoplastic sheets, pipes and plastic fittings under given specified conditions of impact by means of falling weight. It determines anti-impact properties of plastic pipes, sheets and other products. This impact tester is adopted with PLC control & digital touch screen technology for controlling parts like proper figure setup, zero adjustment, preset dropping height, raising & dropping hammer. Adopted with pneumatic technology to prevent secondary impacts with 100 % capture rate.
| Dimension | 730×700×3600 mm |
| Net weight | 300 kg |
| Hammer mass | 0.25 to 16 kg |
| Height error | < ± 2 mm |
| Power supply | AC 220 V +/- 10 %, 50 Hz single phrase |
| Noses of strikers | d25 to d90 |
| Temperature range | 10 to 35°C |
| Maximum falling height | 2000 mm |
| Resolution of displacement | 1 mm |
Falling Weight Impact Tester is used for impact testing strength of plastic sheets, pipes.
Portable Vibration Calibrator LPVC-A10
✓ Frequency (continually adjustable) : 10 Hz to1280 Hz + 0.01 %
✓ Amplitude acceleration ( at 30m/s2 pk ) : 40 Hz to 320 Hz + 0.3 dB + 1 digit
Digital Ultrasonic Flaw Detector LUFC-A10
✓ Measuring Range (mm) : 0 ~ 10000 mm
✓ Vertical Linearity Error : ≤ 3%
Digital Brinell hardness Tester TDBH-A10
✓ Test force : 612.5 N, 980 N, 1225 N
✓ Brinell hardness test : 1837.5 N, 2450 N, 4900 N/7350 N, 9800 N, 14700 N/29400 N
Digital low load Vickers Hardness tester TDVH-A10
✓ Test force : 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N
✓ Hardness value symbol : HV1, HV5, HV10, HV20, HV30, HV250
Rockwell hardness meter TRHM-A10
✓ Preliminary test force : 98 N
✓ Total test force : 588, 980, 1471 N
