LabodamLD-LRCT-A13is a National Standard ASTM D130 “Test Methods for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Testâ€.
| Dimensions | 580 x 460 x 760 mm |
| Sample hole | 4 pieces |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Timing range | 1 min to 24 hours |
| Heating power | 600 W for temperature controlling; 1000 W for auxiliary heating |
| Sample quantity | 4 to 12 pieces |
| Relative humidity | ≤ 85 % |
| Ambient temperature | Room temperature to 35 °C |
| Temperature controller | Pt100 |
| Total power consumption | ≤ 1800 W |
| Temperature controlling range | Room temperature ~ 100 °C |
| Temperature controlling accuracy | ± 1 °C |
It is suitable to determine corrosiveness of aviation gasoline, jet fuels, vehicle gasoline, and natural gasoline, hydrocarbon with Reid vapor pressure lower than 124 kPa, solvent oil, diesel oil, distillate oil, lubricating oil and other petroleum products.
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
