LabodamLD-LRCT-A12is a multifunctional tester with high performance cost ratio. It is designed and made as per the International Standards ASTM D665 “Test Methods for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Waterâ€, ASTM D130 “Test Methods for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test†and ASTM D7671 “Test Methods for Detecting Silver Corrosion from Jet Fuels by the Sliver Strip Testâ€.
| Dimensions | 880 x 430 x 960 mm, 590 x 490 x 430 mm |
| Sample hole | 4 pieces |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Timing range | 1 min to 24 hours |
| Relative humidity | ≤ 85 % |
| Ambient temperature | Room temperature to 35 °C |
| Total power consumption | ≤ 1800W |
| Temperature controlling range | 0 ~ 100 °C |
| Temperature controlling accuracy | ± 1 °C |
It is used to determine corrosiveness aviation gasoline, kerosene, turbine oil, vehicle gasoline, tractor fuels, washing solvent, distillate fuels, lubricating oil and other petroleum products.
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
