OurLD-LOFP-A12Flash point tester is equipped with English man-machine interface. It can preset expected flash point temperature and other parameters which is reasonably designed, safe and convenient to operate. It is designed and made as per ISO 2592, ASTM 92 “Test Methods for Flash Point and Fire Point of Petroleum Products (Cleveland Open Cup Methods).
| Flame | 3 to 4 mm |
| Precision | 0.005 |
| Dimensions | 550 x 470 x 410 mm |
| Power Supply | AC 220 V ± 10 %, 50 Hz |
| Test accuracy | 0.002 |
| Power Consumption | ≤ 500 W |
| Relative Humidity | ≤ 80 % |
| Ambient Temperature | 10 ℃ ~ 40 °C |
| Temperature Measurement- Full Scale | Ambient temperature to 300 °C |
| Temperature Measurement- Resolution | 0.1 °C |
| Temperature Measurement- Repeatability | ≤ 8 °C |
| Temperature Measurement- Reproducibility | ≤ 16 °C |
Used to determine flash point of petroleum products and bituminous materials, excepting fuel oil and materials having a flash point of lower than 79 °C
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
