LabodamLD-LOFP-A10is designed with higher precision and perfection to meet its wide range of applications. It is incorporated with advanced and reasonable temperature control features.
| Flame | 3 to 4 mm |
| Heater | Heated by an electric furnace |
| Gas Tube | Φ0.8 ~ Φ1 mm |
| Dimensions | 410 x 360 x 240 mm |
| Thermometer | 0 ℃ ~ 360 °C |
| Power Supply | AC 220 V ± 10 %, 50Hz |
| Heating Power | 1000W |
| Scale Division | 1 °C |
| Power Consumption | ≤ 1100 W |
| Relative Humidity | ≤ 85 % |
| Ambient Temperature | ≤ 35 °C |
| Inner Crucible-Height | 47 ± 1 mm |
| Outer Crucible-Height | 50 ± 5 mm |
| Inner Crucible-Material | Carbon structural steel |
| Outer Crucible-Material | Carbon structural steel |
| Inner Crucible-Scale Line | 12mm away from the rim of upper opening and 18mm away from the rim of upper opening |
| Inner Crucible-Diameter Of Bottom | Φ38± 1 mm |
| Outer Crucible-Diameter Of Bottom | Φ56 ± 2 mm |
| Inner Crucible-Diameter Of Upper Opening | Φ64 ± 1 mm |
| Outer Crucible-Diameter Of Upper Opening | Φ100 ± 5 mm |
Used to determine the flash point and fire point of lubricating oil and dark petroleum products
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
