LabodamLD-LEGT-B30is manufactured and made as per ASTM D381-12 "Test Methods for Existent Gum in Engine Fuels". It is suitable to determine the tendency of fuels (gasoline, coal oil, diesel oil) to form gum when used in the motor.
| Bath type | Oil bath |
| Dimension | 840 x 380 x 600 mm |
| Heating type | Electric heater |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Bath capacity | 5000 ml ± 50 ml |
| Heating power | 1000 W |
| Relative humidity | ≤ 85 % |
| Ambient temperature | Room temperature to 35 °C |
| Total power consumption | ≤ 1200 W |
| Temperature controlling range | RT to 250 °C |
| Temperature controlling accuracy | 150 °C ± 3 °C；180 °C ± 3 °C；250 °C ± 5 °C |
It is widely used in petroleum, chemical, automobile and development industries. It is also suitable for determining tendency of fuels (gasoline, kerosene and diesel oil) to form gum when the fuels are used in the engine.
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
