LDT-A16 is double-units distillation tester in which the minimum temperature of the condenser pipe can reach 0℃. It is designed according to “Test Methods for Distillation Characteristics of Petroleum Products at Barometric Pressure” as per ASTM D86.
| Dimension | 830 x 610 x 870 mm |
| Thermometer | (-2 )°C ~ 300 ℃ and (-2) °C ~ 400 ℃ |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Division value | 1°C |
| Scale division | 1 ml |
| Graduated flasks | 100 ml |
| Relative humidity | ≤ 85 % |
| Distillation flask | 125 ml |
| Ambient temperature | ≤ 35 °C |
| Heating power system | 1000 W × 2 |
| Total power consumption | ≤ 5000 W |
| Temperature controlling accuracy | ± 0.5 °C |
| Inner diameter of electric furnace | φ32 mm, φ38 mm |
| Outer diameter of electric furnace | φ50 mm |
It is used to determine natural gasoline, vehicle gasoline, special boiling point solvent, naphtha, diesel oil, distillate and similar petroleum products.
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
