LDT-A15 is a double unit distillation tester which can determine two sets of different sample. It is designed according to “Test Methods for Distillation Characteristics of Petroleum Products at Barometric Pressure” as per ASTMD86.
| Dimension | 830 x 610 x 870 mm |
| Thermometer | (-2 )°C ~ 300 ℃ and (-2) °C ~ 400 ℃ |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Graduated flasks | 100 ml |
| Relative humidity | ≤ 85 % |
| Distillation flask | 125 ml |
| Ambient temperature | ≤ 35 °C |
| Heating power system | 1000 W × 2 |
| Total power consumption | ≤ 2500 W |
| Temperature range air bath | Room temperature+ 10 °C ~ 60 °C |
| Temperature controlling accuracy | ± 0.5 °C |
| Scale division of graduated flask | 1ml |
| Inner diameter of electric furnace | φ32 mm, φ38 mm |
| Outer diameter of electric furnace | φ50 mm |
It is used determine distillation characteristics of natural gasoline, vehicle gasoline, aviation gasoline, jet fuels, special boiling point solvent, distillate and similar petroleum products.
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
