LabodamLD-LDT-A10is automated and can withstand a very high temperature. It is designed according to “Test Methods for Distillation Characteristics of Petroleum Products” as per ASTM D86.
| Dimension | 790 x 360 x 710 mm |
| Thermometer | 0 °C ~ 360 °C |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Scale division | 1 °C |
| Graduated flasks | 10 ml and 100 ml |
| Relative humidity | ≤ 85 % |
| Refrigeration tube | Made of copper tube of ф16 × 1 |
| Ambient temperature | (-10) °C ~ 35 °C |
| Heating power system | 1000 W / 220 V |
| Ball diameter of flask | Ф69 ± 1 mm |
| Neck diameter of flask | Ф16 ± 1 mm |
| Total power consumption | ≤ 1100 W |
| Size of refrigeration bath | 180 x 100 x 150 mm |
| Length of refrigeration tube | 555 ± 3 mm |
| Scale division of graduated flask | 10 ml is 0.1 ml and 100 ml is 1 ml |
| Angle between branch tube and neck | 75° ± 3° |
| Inner diameter of electric furnace | Ф50 mm, Ф30 mm and with a gap |
| Outer diameter of electric furnace | Ф105 mm |
| Angle between refrigeration tube and water level | 15° |
It is used to determine distillate of engine fuel, solvent oil, and light petroleum products.
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
