LCFP-A13 is designed with RS-323 and 485 computer ports which can calibrate the effect of barometric pressure to the test and calculate the modified value. It modifies system deviation automatically and can simulate and show temperature-time curve. It is designed as per “Test Methods for Flash Point of Petroleum Products (Closed Cup Methods)†ASTM D93.
| Accuracy | 0.005 |
| Resolution | 0.1 ℃ |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Ignition Mode | electron igniter / gas flame |
| Repeatability | ≤ 2 ℃ |
| Reproducibility | ≤ 4 ℃ |
| Measurement Range | Room Temperature ~ 300 ℃ |
| Relative humidity | ≤ 80 % |
| Temperature range | Room Temperature ~ 300 ℃ |
| Ambient temperature | 10 °C ~ 40 ℃ |
| Total Power Consumption | 300 W |
It is used to determine the flash point of diesel and other fuel types in petrochemical analysis, flavors in food testing, paints in materials testing, and waste removal for environmental analysis
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
