Automatic Bomb Calorimeter LD-LABC-B10

SKU: LD-LABC-B10

Automatic Bomb CalorimeterLD-LABC-B10comes with automatic oxygen filling and releasing, fully automatic bomb raising and lowering system. Equipped with propeller to achieve high stirring efficiency, and faster oxygen bomb heat transfer to reduce test period. It is in accordance with international standards ASTM D5865, ISO 1928.

✓ Unique bucket water circle system, automatic determination water volume
✓ Easy assembly and disassembly of stainless steel oxygen bomb
✓ Built-in intelligent water tank with heating and cooling function
✓ Helix tube multipoint isothermal technology
✓ Independent jacket and bucket water system
✓ Large heat capacity with stable and accurate results
✓ Self-protection, self-diagnostic function
✓ Analysis, statistics report, system monitor
✓ Unique crucible support design, easy to use

Also available in:

Calorimeter type : Isoperibol Calorimeter type : Isoperibol Calorimeter type : Isoperibol Calorimeter type : Isoperibol

Request A Quote Download Catalog


Weight	50 kg
Network	Yes
Bomb volume	250 ml
Bomb washing	Manual
Cooling type	Refrigerating device
No. of Tests	6/hour
Power supply	220 V ±, 15 to 10 %, 50/60 Hz
Analysis time	< 8 min full test process: <10 min
Bomb identity	Yes
Maximum Power	0.6 kW
Bucket filling	Automatic
Oxygen filling	Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering
Power Inverter	No
Gas requirement	99.5 % oxygen
Precision (RSD)	≤ 0.01 %
Reproducibility	0.10 % (analysis of 1 g of benzoic acid)
Stirring method	Propeller
Calorimeter type	Isoperibol
Water requirements	Distilled water
Advance Calculations	Yes
Temperature Increase	2°C (average)
Working temperatures	≤ 32°C
Temperature resolution	0.0001 K
Bomb pressure (maximum)	20 MPa
Heat Capacity Stability	≤ 0.25 % within three months
Temperature measurement	PT1000 (temperature probe)
Energy measurement range	0 to 50000 J

Used in determination of calorific value of solid and liquid combustibles such as coal, coke, oil, petroleum material, biomass, cement and others.

Similar Products

Ash Content Tester LACT-A10 ✓ Controlled temperature : 775 ±25 ℃ ✓ Temperature rising time of empty chamber : ≤ 50 min Mercaptan Sulfur Tester LMST-A10 ✓ Potential measuring range : (0 to ±1999.5) Mv ✓ Intrinsic error : 0.1 % ±0.5 mV Interfacial Tension Tester LIT-A10 ✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m

Water Soluble Acid and Alkali Tester LAAT-A10 ✓ Graduated flask : 100 ml，50 ml ✓ Conical flask : 100ml

Acid Number and Acidity Tester LAAT-A11 ✓ Ambient temperature : ≤ 35 °C ✓ Relative humidity : ≤ 85 %