Features

  • Equipped with industrial pH electrode
  • 1 to 3 pH calibration points with ‘Automatic buffer recognition’
  • ATC mode for accurate readings over entire range
  • Low high alarm limits set automatically activate an external device
  • Selectable temperature units °C or °F for diff. applications
  • System menu allows setting of up to 9 parameters
  • Reset features to resumes all setting back to default
  • Manual temperature calibration improves accuracy

Online pH Controller LD-LOPC-A10

Online pH ControllerLD-LOPC-A10features 1 to 3 points pH calibration system, and 4 to 20 mA output signal transmitter. The large and clear back light LCD displays Calibration and setup values, temperature values, ATC (automatic temperature compensation) values, high and low limit of measurement. The automatic electrode slope display helps user decide when to replace the sensor.

SKU Code: LD-LOPC-A10

Also Available in below capacities

pH measurement range : 01.00 to 15.00 pH
Load Max 500
Power DC 24 V
Weight 350 g
Display LCD
mV accuracy ± 1 mV
pH accuracy ± 0.01 pH
Signal output 4 to 20 mA
mV resolution 1 mV
pH resolution 0.01 pH
Dimension (L*W*H) 96 × 96 × 75 mm
Temperature range 0 to 100°C , 32 to 212°F
pH Buffer Solutions USA (pH 4.01, 7.00, 10.01) or NIST (pH 4.01, 6.86, 9.18)
Connection Interface RS485
Connection Terminals Detectable screw terminals
Temperature accuracy ± 1°C
mV measurement range -1000 to 1000 mV
pH measurement range 01.00 to 15.00 pH
pH calibration points 1 to 3 points
Temperature resolution 0.1°C
Environmental conditions Ambient temperature to ≤ 60°C, RH ≤ 80%
Temperature compensation Automatic, 0 to 100°C , 32 to 212°F
Low and high alarm limits 1.00 to 10.00 pH, selectable
Temperature calibration range ± 10°C
Temperature calibration points 1 point
Used to measure pH in waste water treatment and quality inspection plants, filtration systems, RO treatment water plants, Agriculture, Aquaculture, and research industry.

Similar Products