Features

  • Equipped with industrial conductivity electrode
  • 1 to 3 conductivity calibration points, 1 temperature calibration point
  • Selectable temperature units °C or °F for diff. applications
  • System menu allows setting of up to 9 parameters
  • Reset features to resumes all setting back to default
  • ATC mode for accurate readings over entire range
  • Low and high alarm limits set automatically activate an external device
  • Manual temperature calibration improves accuracy

Online Conductivity Controller LD-LOCC-A10

Online Conductivity ControllerLD-LOCC-A10features 3 points conductivity calibration system, TDS measurement mode, and 4 to 20 mA output signal transmitter. The large and clear back light LCD displays Calibration and setup values, Temperature values, ATC (automatic temperature compensation) values, high and low limit of measurement. This controller measures Conductivity and TDS values in µS/ cm, and mS/ cm units.

SKU Code: LD-LOCC-A10

Also Available in below capacities

Conductivity measurement range : 0.01 to 20.00, 200.0, 2000 µS/ cm, 20.00, 200.0 mS/ cm
Load Max. 500 Ω
Power DC 24 V
Weight 350 g
Display LCD
Interface RS485
TDS factor 0.1 to 1.0
TDS accuracy ±1 % F.S.
Cell constant K= 0.1, 1, 10
Signal output 4 to 200 mA
Dimension (L*W*H) 96 × 96 × 75 mm
Connection terminals Detachable screw terminals
Temperature accuracy 1°C
Conductivity accuracy ±1 % F.S.
Reference temperature 25°C
TDS measurement range 0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
Temperature resolution 0.1°C
Conductivity resolution 0.001/ 0.01/ 0.1/ 1
Environmental conditions Ambient temperature to ≤ 60°C, RH ≤ 80%
Temperature compensation Automatic, 0 to 100°C , 32 to 212°F
Low and high alarm limits 0.02 uS/ cm to 20.0 mS/ cm, selectable
Temperature measurement range 0 to 100°C, 32 to 212°F
Conductivity measurement range 0.01 to 20.00, 200.0, 2000 µS/ cm, 20.00, 200.0 mS/ cm
Temperature calibration range Measured value ± 10°C
Temperature calibration points 1 point
Conductivity calibration points 1 to 3 points
Conductivity calibration solutions 84 µS/ cm, 1413 µS/ cm, 12.88 mS/ cm,111.8 mS/ cm
Used to measure conductivity and TDS values required for quality checking and research purpose across water treatment plants, filtration units, RO treatment plants, Agriculture industry, Aquaculture industry and others.

Similar Products