Crush tester LD-TP-L10
SKU: LD-TP-L10Crush testerLD-TP-L10is adopted with advanced parts, microprocessor controlled system and multifunctional design to test, translate, adjust, display, remember, and print the test data. User can conduct any test of choice like TCT, FCT, ECT, and PAT for paper and cardboard material by selecting additional, corresponding accessories.
- ✓ Compact structure
- ✓ Easy maintenance
- ✓ Tests peel strength (PAT) using peel test rack
- ✓ Tests Strength of flat compression (FCT) using flat compression sampler
- ✓ Tests edge crush test (ECT) using edge crush cutter and auxiliary guide block
- ✓ Tests ring crush test (RCT) using compression plate and special sampler
Also available in:
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : 38×70 mm
Sample (size) length : 90 to 200 mm
Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
Sample (size) length : 0 to 200 mm adjustable
| Speed | 12.5 ± 2.5 mm/min |
| Accuracy | ± 1 % |
| Dimension | 450×400×500 mm |
| Net weight | 75 kg |
| Resolution | 1 N |
| Variability | ≤ 1 % |
| Power supply | AC220 V ± 10 % , 50 Hz |
| Maximum distance | 78 mm |
| Measurement range | 5 to 500 N, 50 to 3000 N |
The crush tester is used to test crush strength of paper & paperboard using different auxiliary appliances across paper & printing, packaging industry.
Similar Products
Whiteness and chromaticity tester TP-A10
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ Measurement mode : Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C *
Whiteness meter TP-A11
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ System : D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm
Tensile Stiffness Tester TP-B10
✓ Sample (size) length : 38×70 mm
✓ Measuring range : (1-500) mN.m (divided into 7 small ranges)
Automatic horizontal tensile tester TP-B11
✓ Sample (size) length : 90 to 200 mm
✓ Sample width : 15 mm, 25 mm, 50mm
Automatic horizontal tensile tester TP-B12
✓ Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
✓ Sample width : 15 mm
