Mullen burst tester LD-TP-K10
SKU: LD-TP-K10Mullen burst testerLD-TP-K10is used to measure the bursting strength of paper submitted to increasing hydraulic pressure. Used in testing bursting strength of all types of papers in the 0 to 5600 kPa range depending on clamp pressure. It has mechanically & electrically integrated modern design, with compact structure & easy maintenance. The advantage of user-friendly operations, stable performance makes this tester an essential instrument for papermaking, packing, inspection and research.
- ✓ Large colored LCD touch screen display
- ✓ Bursting strength range 0 to 5600 kPa
- ✓ Use of hydraulic oil as the driving force to break the specimen
- ✓ Equipped with high precision sensors
- ✓ Equipped micro-computer control system
- ✓ Attachment for micro-printer with high print speed and low failure rate
- ✓ Specimen is broken , stores the maximum amount automatically
Also available in:
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : 38×70 mm
Sample (size) length : 90 to 200 mm
Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
Sample (size) length : 0 to 200 mm adjustable
| Accuracy | ± 0.5 % F.S. |
| Dimension | 480×420×600 mm |
| Net weight | 65 kg |
| Power supply | AC220 V ± 10 % , 50 Hz |
| Clamp pressure | ≥ 690 kPa |
| Film resistance | For bulge height = 10 mm, The pressure = 170 to 220 kPa For bulge height = 18 mm, The pressure = 250 to 350 kPa |
| Compression speed | 170 ± 15 ml/min |
| Measurement range | 0 to 5600 kPa |
| Pneumatic pressure | 0.45 to 0.6 MPa |
| Diameter of lower clamp | 31.5 ± 0.05 mm |
| Diameter of upper clamp | 31.5 ± 0.05 mm |
Mullen burst tester is used to measure bursting strength of paperboard, paper across paper industry, packaging industry, printing industry.
Similar Products
Whiteness and chromaticity tester TP-A10
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ Measurement mode : Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C *
Whiteness meter TP-A11
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ System : D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm
Tensile Stiffness Tester TP-B10
✓ Sample (size) length : 38×70 mm
✓ Measuring range : (1-500) mN.m (divided into 7 small ranges)
Automatic horizontal tensile tester TP-B11
✓ Sample (size) length : 90 to 200 mm
✓ Sample width : 15 mm, 25 mm, 50mm
Automatic horizontal tensile tester TP-B12
✓ Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
✓ Sample width : 15 mm
