Internal Ply bond Tester LD-TP-J11
SKU: LD-TP-J11Internal Ply bond TesterLD-TP-J11is used to test the Z direction tensile internal (interlayer bonding) bonding strength of various paperboards. The instrument design is based on a falling pendulum which creates a high speed impact on a paper specimen. The test paper sample is impacted by certain angle and weight. The energy absorbed by the paper indicates the internal bonding strength of that paper.
- ✓ 90° impact angle
- ✓ Tests 5 sample at a time
- ✓ LCD digital display
- ✓ Magnetic pendulum release
Also available in:
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : 38×70 mm
Sample (size) length : 90 to 200 mm
Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
Sample (size) length : 0 to 200 mm adjustable
| Unit | Lb-ft/in2 J/m2 |
| Error | A: ± 1 J/m2 B: ± 2 J/m2 |
| Weight | 92 g |
| Capacity | A: 20 to 500 J/m2 B: 500 to 1000 J/m2 |
| Dimension | 700×340×600 mm |
| Impact angle | 90° |
| Sample amount | 5 pcs |
Internal ply bond tester is used in paper, corrugated paper & packaging industry.
Similar Products
Whiteness and chromaticity tester TP-A10
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ Measurement mode : Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C *
Whiteness meter TP-A11
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ System : D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm
Tensile Stiffness Tester TP-B10
✓ Sample (size) length : 38×70 mm
✓ Measuring range : (1-500) mN.m (divided into 7 small ranges)
Automatic horizontal tensile tester TP-B11
✓ Sample (size) length : 90 to 200 mm
✓ Sample width : 15 mm, 25 mm, 50mm
Automatic horizontal tensile tester TP-B12
✓ Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
✓ Sample width : 15 mm
