Water absorption tester LD-TP-C20
SKU: LD-TP-C20Water absorption testerLD-TP-C20is used to measure the degree of water absorption of a paper & cloth. Designed using ‘Rise in capillary by millimeters’ principle, where a specimen is suspended in a vat filled with water. The capillary rise of water in paper/cloth is the water distance rise in a strip of paper/cloth suspended vertically with its lower end immersed in water.
- ✓ Use of ‘Rise in capillary by millimeters’ technology
- ✓ Maximum absorption height 200 mm
- ✓ Specimen size 15×250 mm
- ✓ User-friendly operations
Also available in:
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : 38×70 mm
Sample (size) length : 90 to 200 mm
Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
Sample (size) length : 0 to 200 mm adjustable
| Dimension | 420×250×380 mm |
| Net Weight | 15 kg |
| Specimen size | 15×250 mm |
| Division value | 1 mm |
| Measurement range | 0 to 200 mm |
| Number of specimen holders | 5 |
Water absorption tester is used to measure the degree of water absorption of paper in pulp & paper industry.
Similar Products
Whiteness and chromaticity tester TP-A10
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ Measurement mode : Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C *
Whiteness meter TP-A11
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ System : D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm
Tensile Stiffness Tester TP-B10
✓ Sample (size) length : 38×70 mm
✓ Measuring range : (1-500) mN.m (divided into 7 small ranges)
Automatic horizontal tensile tester TP-B11
✓ Sample (size) length : 90 to 200 mm
✓ Sample width : 15 mm, 25 mm, 50mm
Automatic horizontal tensile tester TP-B12
✓ Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
✓ Sample width : 15 mm
