Pulp beating (refining) freeness tester LD-TP-C10
SKU: LD-TP-C10Pulp beating (refining) freeness testerLD-TP-C10is used to measure the rate of dilution of pulp suspended water materials and to determine de-watering time. It is adopted with spring pre-tightening mechanism keeps the rubber sealing ring of the sealing hammer body in contact with the bottom of the water filtering tube. This increases the sealing performance of the sealing hammer body.
- ✓ Use of Schopper-Riegler test method for designing
- ✓ Adopted with spring pre-tightening mechanism
- ✓ Measurement range 0 to 100° SR
- ✓ Equipped with manual compression seal cone
- ✓ Simple user–friendly operations
Also available in:
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : 38×70 mm
Sample (size) length : 90 to 200 mm
Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
Sample (size) length : 0 to 200 mm adjustable
| Dimension | 450×250×1100 mm |
| Net Weight | 40 kg |
| Draining time | 149 ± 1 s |
| Measurement range | 0 to 100° SR |
| Hydraulic pressure | >0.3 MPa |
| Sealed testing speed | 100 ± 10 mm/s |
| Residual water volume | 7.85 to 8 ml |
| Volume of distilled water | 1000 ± 5 ml |
Pulp beating freeness tester has applications in pulp & paper industry, packaging industry.
Similar Products
Whiteness and chromaticity tester TP-A10
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ Measurement mode : Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C *
Whiteness meter TP-A11
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ System : D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm
Tensile Stiffness Tester TP-B10
✓ Sample (size) length : 38×70 mm
✓ Measuring range : (1-500) mN.m (divided into 7 small ranges)
Automatic horizontal tensile tester TP-B11
✓ Sample (size) length : 90 to 200 mm
✓ Sample width : 15 mm, 25 mm, 50mm
Automatic horizontal tensile tester TP-B12
✓ Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
✓ Sample width : 15 mm
