Vertical tensile tester LD-TP-B20
SKU: LD-TP-B20Vertical tensile testerLD-TP-B20is microprocessor controlled adopted with vertical, many pillar structure. The clamp distance can be adjusted within the specified scope. Test directly for the normal size sample and can adjust sample length and measurement range as per the needs. It is used to test the tensile strength, tensile force, tensile energy absorption, fracture length, tensile index, 180° peel strength of paper, paperboard, plastic film & other non-metal materials.
- ✓ Imported noiseless motor, with precise controls
- ✓ Large screen display with wide user interface
- ✓ Equipped with RS232 interface, connection to PC
- ✓ Easy to obtain & print the statistical results
- ✓ High automation system with messages processing & motion controls parts
- ✓ Multifunctional, flexible operation settings
- ✓ Protection against sudden power-off
Also available in:
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Sample (size) length : 38×70 mm
Sample (size) length : 90 to 200 mm
Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
Sample (size) length : 0 to 200 mm adjustable
| Accuracy | ± 1 % |
| Net weight | 55 kg |
| Power supply | 220 V ± 10 %, 50 Hz |
| Sample width | 15 mm |
| Measuring range | 0 to 30 N (tissue paper), 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N |
| Dimension (L*W*H) | 450 × 550 × 120 mm |
| Sample (size) length | 0 to 200 mm adjustable |
Tensile horizontal tester is used in paper, paperboard, plastic film & other non-metal materials industry to test tensile strength, tensile force, tensile energy absorption, fracture & other parameters.
Similar Products
Whiteness and chromaticity tester TP-A10
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ Measurement mode : Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C *
Whiteness meter TP-A11
✓ Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
✓ System : D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm
Tensile Stiffness Tester TP-B10
✓ Sample (size) length : 38×70 mm
✓ Measuring range : (1-500) mN.m (divided into 7 small ranges)
Automatic horizontal tensile tester TP-B11
✓ Sample (size) length : 90 to 200 mm
✓ Sample width : 15 mm, 25 mm, 50mm
Automatic horizontal tensile tester TP-B12
✓ Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable)
✓ Sample width : 15 mm
