Lubricating Oil Rust Characteristics Tester LD-LRCT-A11
SKU: LD-LRCT-A11LRCT-A11 is designed and made as per the International Standard ASTM D665 - IP135. “Test Methods for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Waterâ€
- ✓ Digital Temperature and time Display
- ✓ The test efficiency is high
- ✓ Timer to control test time and automatic timing
Also available in:
Sample hole : 2 pieces
Sample hole : 4 pieces
Sample hole : 4 pieces
Sample hole : 4 pieces
| Dimensions | 880 x 430 x 840 mm |
| Sample hole | 4 pieces |
| Power supply | AC 220 V ± 10%, 50Hz |
| Timing range | 1 min to 24 hours |
| Heating power | 600 W for temperature controlling; 1000 W for auxiliary heating |
| Relative humidity | ≤ 85 % |
| Ambient temperature | Room temperature ~ 35 °C |
| Temperature controller | Pt100 |
| Speed of stirring motor | 1400 rpm |
| Total power consumption | ≤ 1800 W |
| Speed for sample stirring | 1000 ± 50 rpm |
| Temperature controlling range | 0 ~ 100 °C |
| Temperature controlling accuracy | ± 1 °C |
It is also suitable to determine rust-preventing characteristics of other oils, such as hydraulic pressure oil, circulation oil, as well as liquids heavier, whose gravity is greater than water.
Similar Products
Liquefied Petroleum Gas Copper Corrosion Tester LRCT-A10
✓ Sample hole : 2 pieces
✓ Speed of stirring motor : 1400 rpm
Rust Characteristics and Corrosion Tester LRCT-A12
✓ Sample hole : 4 pieces
✓ Ambient temperature : Room temperature to 35 °C
Copper Strip Corrosion Tester LRCT-A13
✓ Sample hole : 4 pieces
✓ Sample quantity : 4 to 12 pieces
