Elemental (CHN) Analyzer LD-LCHN-A10
SKU: LD-LCHN-A10Elemental (CHN) AnalyzerLD-LCHN-A10is used to determine Carbon, Hydrogen and Nitrogen in macro amount of samples. Features dual stage furnace with pure oxygen flow for complete combustion, multiple detector, blended gas analysis, IR CO2 monitor detector, stackable auto loader etc. to ensure efficient performance and obtain reliable results.
- ✓ Dual-stage furnace with complete catalytic combustion
- ✓ Customized multiple detectors for different elements
- ✓ Sample is analyzed in minimum time
- ✓ 5.0 ml Blended gas analysis to reduce the consumption of helium and copper
- ✓ IR CO2 and IR H2O detector are used
- ✓ Complete combustion ensured by IR CO2 monitor detector
- ✓ Stackable auto loader , 25/35 samples in each layer
- ✓ Can analyze macro weighed samples of liquids, solids and heterogeneous matrix
- ✓ Windows based operating software to control and view parameters on PC
- ✓ Complies with CE standards
Also available in:
Gas required : Helium: 99.99% 0.25 ± 0.01 mPa
Oxygen: 99.5% 0.25 ± 0.01 mPa
Nitrogen or Composed air: 0.25 ± 0.01 mPa
Oxygen: 99.5% 0.25 ± 0.01 mPa
Nitrogen or Composed air: 0.25 ± 0.01 mPa
| Power | 5.5 kW |
| Weight | 110 kg |
| Dimension | 690 × 750 × 720 mm |
| Autosampler | Stackable auto loader, up to 140 samples by 4 layers |
| Consumption | Helium 200 ml/ min |
| Sample mass | Up to 1000 mg, depending on the sample matrix |
| Furnace type | Resistance furnace (main furnace and furnace rear) |
| Power supply | AC 220 ± 10 %V , 50/60 Hz |
| Analysis time | 4 to 6 mins, depending on sample combustion condition |
| Maximum temperature | 1050°C |
It is used for analysis of fuels, biomass, food, oil, coal, waste, plastic, solvents, fertilizers etc. samples in different laboratories and industries.
